Description

Use I-Cal Easy to automate sensor calibration, enter up to 20 calibration points

• Windows 10 / 8 / 7 / XP
• Fully Automatic Calibration
• Design and Print Certificates
• Calculate Coefficients
• Prints PRT and TC tables
• Supports more equipment
• Try the full version free for 30 days

Description

Use Cal NotePad to automatically log and display the temperature of an Isotech
calibration bath together with the unit under test.

• Easy to use
• Interface to Isotech Block Baths & Temperature Indicators
• Log Chart and Export data
• Control Calibration Bath
• Read Standard

Description

Icarus is designed to calculate and display the relationship between resistance and temperature
for Standard Platinum Resistance Thermometers between the triple point of Hydrogen and the freezing point of Silver.
All calculations are performed using the equations and values defined in the International Temperature Scale of 1990 (ITS-90).

• Calculate ITS-90 Coefficients
• Generate coefficients from data or data from coefficients
• Design and Print Certificates
• Use powerful keywords and conditional statements
• Check the calibration quality
• Fit extra calibration points to the curve

Icarus is used at Isotech in our accredited laboratories to create certificates fro PRTs and SPRTS calibrated in ITS-90 Fixed Point Cells.

Description

Isotech Config Utility – this application makes it easy to adjust and set
the various options such as sensor input types, units, resolution etc.

Description

This allows set point programs to be created on a PC and uploaded to the ADVANCED models.

Supports ADVANCED models with firmware version to A5.4x

Description

This is a proprietary software package which allows the user to extract ‘archive’ data
from one or more ADVANCED Dry Blocks and to present this data on a host computer,
as if on a chart, or as a spreadsheet.

Description

PRTCalc is a free utility for those involved with PT100 platinum resistance thermometers.
It allows for the accurate conversion of resistance to temperature or temperature to resistance.
PRTCalc conforms with IEC 751 Amendment 2: December 1995.
PRTCalc also knows the values for the earlier issue of IEC 751.

The user may enter custom coefficients to suit individual probes. Probe specific calculations can then be performed
with all entered data available stored alongside a tag name for the platinum resistance thermometer supplied.

Description

The latest version of the code supports both the current automatic and manual models.
The newer automatic model of the RBC offers improved performance, can be immersed into an oil bath
for temperature control, and of course offers vastly reduced operator time.
There is more information on our website here
https://www.isotechna.com/RBC-Resistance-Bridge-Calibrator-p/rbc.htm

Note:
The latest version of the RBC software is version 2.4, all the DLLs are updated to version 2.4.
This can be considered a new starting point. Earlier versions of the DLLs won’t work with version 2.4 of the RBC software
and version 2.4 of any of the DLLs won’t work with earlier versions of the RBC software.
Anyone who has written their own DLLs and wants to use version 2.4 of the RBC software (or later) will
need to change their function calls to CDECL and recompile them. Otherwise, a fresh installation is all that is needed.

Description

• Additional SCPI Support
• New Thermocouple Types
• Updated Log File Format

Description

Required for use with Cal Notepad.