You are here: Home > Products > Secondary Laboratory > Liquid Calibration Baths

Liquid Calibration Baths

Sort By:

Page of 1

Orion 796 Deep Immersion Calibration Baths

Deep Immersion Calibration Baths Available in Three Ranges Covering -80°C to 300 °C

Stability: ±0.007 °C
Deep immersion (470mm or 18.5”) with low filling costs
Capable of calibrating liquid-in glass-thermometers, level adapter required
Variable Speed Stirring - allowing optimum performance for a wide range of viscosities
Over and Under Temperature Protection - protect expensive Water Triple Point (WTP) Cells as well as over temperature conditions

Parallel Tube Calibration Baths Available in Three Ranges Covering -80°C to 300 °C

Stability: ±0.003°C
Uncertainty: to <1mK
Deep immersion: (485mm or 19in) with low filling costs
Capable of calibrating liquid in glass thermometers, no level adapters required
Variable Speed Stirring - allowing optimum performance for a wide range of viscosities

Parallel Tube Calibration Baths Covering -65°C to 300 °C

Stability: ±0.007 °C
Capable of uncertainties to ±0.0005°C (0.5mK)
Capable of calibrating liquid in glass thermometers, no level adapters required
Variable Speed Stirring - allowing optimum performance for a wide range of viscosities

Liquid Calibration Baths, -80°C to 300°C (572°F) in Three Models

Stability: Better than ±0.030°C over the complete temperature range
Best Uniformity: ±0.002°C (Oil, 50°C)
Immersion Depth: 300mm (5 liters)
Circular Design: Eliminates cold corners in tank-shaped baths
Parallel Tube Action: Creates very small vertical and axial gradients, enabling smallest overall uncertainties